Hubs

Shimano XT M756 front hub. - Double contact sealing - Super polished bearing races for low friction rolling - Light alloy QR lever and nut - 6-bolt ISO disc mounting surface

Hubs typically seem to fall into two general categories: light and very expensive or heavy and cheap. With this typical bike industry paradigm, we saw an opportunity. You see, for years we've been using high-end geared hubs from the manufacturer of our track offerings on our personal bikes. They are very lightweight (peep the specs) and just plain work. We decided to finally make those hubs available to you and corner the market in our own category: lightweight, affordable, and incredibly practical. We've ridden them on all kinds of bikes from the Electric Queen to the Mr. Pink and we're in love. They are reliable, dang light and very reasonably priced. We offer the Go-Devil in a minimal amount of configurations and ship them with all the necessary endcaps and a quick release skewer, future proofing them in case you want to use them on various bikes over the years. Quick Release lever and 12mm thru-axle endcaps are included. On all models we spec high-quality made in Japan stainless-steel sealed bearings. The splined freehubs have 28 points of engagement, the XD driver has 56. Oh, and we've got polished options as well. Kind of a big deal because polished hubs have become a rarity. - Weight: 277g - Includes 12mm thru-axle end caps and quick release skewer - Drive Side Center To Flange 18.5mm - Non-Drive Center to Flange 34mm - Non-Drive Flange Diameter 58mm - Drive Side Flange Diameter 49mm

The Shimano HB-M525A hub is ideal for use with 6-bolt disc brake rotors and quick release dropouts. - Double contact sealing - Super polished bearing races for low friction rolling - 6-bolt ISO disc mounting surface

- Elite Series road hubs - Shimano and Campagnolo cassette body options with 6 pawl/48 point/7.5° engagement - Straight pull and J-bend spoke options - Sealed bearings - Material: AL6061 - Brake Type: Rim - OLD: 130mm Straight Pull Spoke: PCD-L: 32mm PCD-R: 52.5mm LTF-L: 27.7mm LTF-R: 50.8mm CTF-L: 37.45mm CTF-R: 14.35mm J-Bend Spoke: PCD-L: 38.5mm PCD-R: 50.6mm LTF-L: 27.45mm LTF-R: 49.05mm CTF-L: 37.7mm CTF-R: 16.1mm

- Elite Series convertible road disc hubs - Available in multiple axle configurations - Straight pull and J-bend spoke options - 6 bolt and Center Lock disc brake rotor options - Sealed bearings - Material: AL6061 Straight Pull Spoke/6-Bolt Disc: PCD-L: 36mm PCD-R: 36mm LTF-L: 27.75mm LTF-R: 15.25mm CTF-L: 22.25mm CTF-R: 34.75mm J-Bend Spoke/Centerlock Disc: PCD-L: 45mm PCD-R: 45mm LTF-L: 27.25mm LTF-R: 15.45mm CTF-L: 22.75mm CTF-R: 34.55mm

- Elite Series convertible road disc hubs - Available in multiple axle configurations - Shimano and Campagnolo cassette body options with 6 pawl/48 point/7.5° engagement - Straight pull and J-bend spoke options - 6 bolt and Center Lock disc brake rotor options - Sealed bearings - Material: AL6061 Straight Pull Spoke/QR Axle: PCD-L: 35mm PCD-R: 49mm LTF-L: 32.75mm LTF-R: 50.05mm CTF-L: 34.9mm CTF-R: 17.6mm Straight Pull Spoke/12mm Thru-Axle: PCD-L: 35mm PCD-R: 49mm LTF-L: 36.25mm LTF-R: 53.55mm CTF-L: 34.9mm CTF-R: 17.6mm J-Bend Spoke/QR Axle: PCD-L: 45mm PCD-R: 50.6mm LTF-L: 32.65mm LTF-R: 48.2mm CTF-L: 35mm CTF-R: 19.45mm J-Bend Spoke/12mm Thru-Axle: PCD-L: 45mm PCD-R: 50.6mm LTF-L: 36.15mm LTF-R: 51.7mm CTF-L: 35mm CTF-R: 19.45mm

- Aluminum hubs - Sealed bearing - Black - 6-bolt disc rotor

Aluminium front hub for bicycle - 18P DBCL 24 holes, straight pull, black. Dimension: 12x100mm.

- Elite Series convertible MTB hubs - Available in multiple axle configurations - Straight pull and J-bend spoke options - 6 bolt disc brake rotor compatible - Sealed bearings - Material: AL6061 - Wt: 180g J-Bend: - PCD-L: 58mm - PCD-R: 45mm - LTF-L: 27.65mm - LTF-R: 15.35mm - CTF-L: 22.35mm - CTF-R: 34.65mm Straight Pull: - PCD-L: 51mm - PCD-R: 51mm - LTF-L: 31.4mm - LTF-R: 19.6mm - CTF-L: 18.6mm - CTF-R: 30.4mm

Shimano XT FH-M756 Series Rear Hub - Double contact bearing seals - Super polished bearing races for low friction rolling - Light alloy QR lever and nut - 6-Bolt rotor mount - Bearing Type: Loose Ball - Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed - Center to Flange, Left: 33.5 - Center to Flange, Right: 20.5 - Flange Diameter Left: 61 - Flange Diameter Right: 61 - Hub Drilling: 32 - Hub/Brake Compatibility: 6-Bolt Disc - Rear Axle: QR x 135mm - Skewer Included: Yes - Spoke Interface: J-Bend - Weight: 495 grams

• Aluminum hub body • Quick release • 100mm OLD • 20, 24, 28, 32, and 36-hole spoke drilling • Black or Silver

Industry Nine Hydra Classic hubs are the heart of your wheelset, everything revolves around them, literally. Every Classic Hydra hub is made start to finish in Asheville, NC. From turning and milling bar stock 7075-T6 aluminum for shells, axles and encaps, wire EDM cutting A2 tool steel for pawls and driverings, to in-house anodization lab, every step of design, engineering, manufacturing and assembly is done to exacting standards. - 690 P.O.E. Hydra Freehub body engages every .52 degrees yeilding telepathic control - 6 pawl, 6 phase - 115 tooth drivering - Easily serviced with no proprietary tools. Designed to keep you in the saddle and out of the service queue - Classic j-bend spoke interface - Steel cartridge bearings are durable

Industry Nine Hydra Classic hubs are the heart of your wheelset, everything revolves around them, literally. Every Classic Hydra hub is made start to finish in Asheville, NC. From turning and milling bar stock 7075-T6 aluminum for shells, axles and encaps, wire EDM cutting A2 tool steel for pawls and driverings, to in-house anodization lab, every step of design, engineering, manufacturing and assembly is done to exacting standards. - 690 P.O.E. Hydra Freehub body engages every .52 degrees yeilding telepathic control - 6 pawl, 6 phase - 115 tooth drivering - Easily serviced with no proprietary tools. Designed to keep you in the saddle and out of the service queue - Classic j-bend spoke interface - Steel cartridge bearings are durable

Industry Nine Hydra Classic mountain hubs are loaded with features every rider will appreciate such as revolutionary 0.52° engagement, generously low weights and an intuitive layout that can be serviced without any proprietary tools. - From turning and milling bar stock 7075-T6 aluminum for shells, axles and encaps, wire EDM cutting A2 tool steel for pawls and driverings, to in-house anodization lab, every step of design, engineering, manufacturing and assembly is done to exacting standards in Asheville, NC - 690 P.O.E. Hydra Freehub body engages every .52 degrees yeilding telepathic control - Classic j-bend spoke interface - Steel cartridge bearings are durable - Easily serviced with no proprietary tools; Designed to keep you in the saddle and out of the service queue

Industry Nine Hydra Classic hubs are the heart of your wheelset, everything revolves around them, literally. Every Classic Hydra hub is made start to finish in Asheville, NC. From turning and milling bar stock 7075-T6 aluminum for shells, axles and encaps, wire EDM cutting A2 tool steel for pawls and driverings, to in-house anodization lab, every step of design, engineering, manufacturing and assembly is done to exacting standards. - 690 P.O.E. Hydra Freehub body engages every .52 degrees yeilding telepathic control - 6 pawl, 6 phase - 115 tooth drivering - Easily serviced with no proprietary tools. Designed to keep you in the saddle and out of the service queue - Classic j-bend spoke interface - Steel cartridge bearings are durable

Chris King Boost 6-Bolt 148x12 rear hubs are designed as precision mountain tools. We use one-piece solid axles to provide a stiff hub that will help your suspension perform better and drive every watt of power into the dirt. To thwart mud, water, and contaminants as you power through rough trails, Boost 6-Bolt hubs have heavy-duty bearing seals, and a threaded driveshell seal ring. Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use. The patented Chris King RingDrive with 72-points of simultaneous-engagement will get your power to the ground fast, provide unmatched engagement, and give you that legendary Chris King angry-bee sound. - Steel Bearings - Engineered, manufactured and assembled in Portland, Oregon USA - King Lifetime Warranty - Canted flanges for stronger wheel builds - Patented RingDrive system with 72 simultaneously interfaced points of contact for unmatched hub engagement - Legendary made-in-house bearings - Come in 28h and 32h drilling - Available with Micro Spline, HG or XD driveshell. - Easily serviceable with a 2.5mm hex and pick or pen knife - Completely re-buildable with our ISO Hub Service Tool - Responsibly lightweight - Ceramic bearing upgrade available - Specifically designed for "BOOST" 148mm x 12mm axle standard

- Machined and forged alloy construction - Sealed cartridge bearings - Lightweight design - 8/10-speed cassette - Quick-release - 130mm hub spacing - Black or silver

Sealed cartridge bearing High flange design w/cut outs 100mm OLD Lightweight, hollow, heat-treated axle Black, silver, or white 32 or 36-hole spoke drilling

• Sealed cartridge bearings • High flange design • 120mm hub spacing • Aluminum hub body • Lightweight, hollow, heat-treated axle • Fix/freewheel hub threading • 32 and 26-hole spoke drilling • Bolt-on 3/8-inch axle • Black, silver, or white

Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM'S 900 hubs are ready for the challenge. On the inside, the smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike. - Versatile driver body can accept ROAD or MTB drivetrain, full spline or XD cassettes - Fully convertible with tool-free end caps - BOOST variants - 24, 28 or 32 spoke holes

With simple setup and reliable trail performance, the Shimano Deore XT 8100 front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with Center Lock spline mount and lock ring - Tool-less 15mm thru axle system optimizes rigidity and weight - Simple setup and reliable trail performance

- Aluminum alloy shells resist corrosion and provide lightweight longevity - Sealed cartridge bearings offer smooth operation while resisting contaminants - Thru axle design with 8-10 speed cassette and XD drivetrain options - Brake Type: 6B

Build yourself a tough, no-nonsense rear wheel with Shimano's Deore Rear Hub. It features a quality cold-forged-aluminum shell, super durable angular contact bearings with high-polish bearing surfaces, and Shimano's excellent double contact sealing to seal out dirt and water. The freehub boasts quick engagement for lightning fast acceleration and confidence when negotiating tricky technical sections. A quick-release skewer makes wheel installation and removal a breeze.

- Elite Series convertible MTB hubs - Available in multiple axle configurations - Shimano and XD cassette body options with 6 pawl/54 point/6.6-degree engagement - Straight pull and J-bend spoke options - 6 bolt disc brake rotor compatible - Sealed bearings - Material: AL6061 J-Bend/QR: - PCD-L: 58mm - PCD-R: 58mm - LTF-L: 32.95mm - LTF-R: 48.45mm - CTF-L: 34.7mm - CTF-R: 19.2mm J-Bend/142 x 12mm: - PCD-L: 58mm - PCD-R: 58mm - LTF-L: 36.45mm - LTF-R: 51.95mm - CTF-L: 34.7mm - CTF-R: 19.2mm Straight Pull/QR: - PCD-L: 51mm - PCD-R: 51mm - LTF-L: 36.2mm - LTF-R: 50.1mm - CTF-L: 31.45mm - CTF-R: 17.55mm Straight Pull/142 x 12mm: - PCD-L: 51mm - PCD-R: 51mm - LTF-L: 39.7mm - LTF-R: 53.6mm - CTF-L: 31.45mm - CTF-R: 17.55mm

- Forged alloy construction - Sealed Cartridge bearings - Double contact seals - 6-bolt disc - 12x142mm rear spacing - Aluminum hub body

- Aluminum hubs - Loose ball - Bolt-on - Axle: B/O 3/8 - Material: Aly - Color: Blk - Brake Type: 6B - OLD: 170mm

R45D hubs combine low-drag 45-tooth RingDrive™ system, a lightweight hub body, and legendary made-in-house bearings. The result is the increased power and modulation of disc brakes, the fast, smooth rolling speed of our bearings, and the superior responsiveness of our RingDrive engagement system when you put the power down. - Patented RingDrive system with 45 simultaneously engaged points of contact for virtually drag free engagement - Easily serviceable and completely re-buildable with our R45 Hub Service Tool - Hub Drilling: 32 - Skewer Included: No - Hub/Brake Compatibility: Center-Lock Disc - Cassette Body Type: Shimano/SRAM 11 Speed Road , Shimano/SRAM 8, 9, 10 Speed - Spoke Interface: J-Bend - Bearing Type: Sealed Cartridge

• Aluminum hub body • Quick release • Black or silver

- Aluminum hub - Sealed bearing - Black - 6-bolt disc brake rotor mount

- 11-speed compatible road hubs - Sealed bearings keep out contamination and dirt while providing a smooth rotation - Skewer included Specifications: - Use: RR - Gears: 8-11s Cass - Drilling: 24H - Spacing / Axle: 12TA - Brake Type: CL - Bearing Type: Sealed - Bearing Model: 6902 - Bearing Size: 15x28x7