Chains

- An economical replacement chain for 1 speed and 6/7 speed non-index shifting systems. - 1/2 x 1/8 - 300 grams

Super Narrow SIL-TEC HG-X11 Chain (11-speed) FEATURE close - Inner-plate treated with SHIMANO's ultra-low friction surface treatment “SIL-TEC” (inner plate) - Same durability as current 10-speed chain BENEFIT close - System engineered drivetrain component for optimal power transfer - Smooth and precise front and rear shifting - Directional chain - Weight: 257g (114 Link)

- SLX/105 chain 11-speed chain - Sil-Tec surface treatment on roller plates only - Weight: 257g - Now with quick link - Refer to Documents and links to find the right product

Shimano Ultegra/XT HG701 11-Speed Chain. - HG-X11 special asymmetric plate design for 11-speed. - SIL-TEC on Plate - Chain Connection Type: Pressed Pin - Drivetrain Speeds: 11 - Half Link Chain: No

Shimano's Deore-level 10-speed Chain offers excellent power transfer and top-notch durability. It showcases a mud-shedding design and Shimano's directional design with engineered inner and outer plates for smooth, fast and precise shifting.

- Deore/Tiagra 9-speed compatible - 3/32-inch - 116 links

Chain FEATURE - Anti-corrosion treatment for longer service life BENEFIT - Anti-Corrosion

Shimano Tiagra CN-4601 10-Speed Chains - For Ultegra 6703 and 105 5703 triple drivetrains, please see 10-Speed Hyperglide non-directional chains - Hyperglide 10-Speed chain - Not compatible with Shimano 10-Speed Dyna-sys mountain bike drivetrains - Directional inner and outer plates designed for better contact with gear teeth allow smooth shifting even under high load conditions - Chromized rivet pins improve wear resistance - Perforated plates for reduced weight - 116 links

Shimano's Tiagra 10-speed Chain offers crisp shifting and excellent durability. Smooth, precise shifts come courtesy of the engineered inner and outer plates that are specifically designed to accommodate the unique requirements of a moving chain.

Shimano's Ultegra 10-speed Chain offers crisp shifting and excellent durability. Smooth, precise shifts come courtesy of the meticulously engineered inner and outer plate chamfers that are specifically designed to accommodate the unique requirements of a moving chain. And, the plates are perforated to trim precious grams. - Weight: 267g

CN-HG701-11 Super Narrow HG-X11 Chain (11-speed) FEATURE - Directional 11-speed chain - More efficient and silent, less maintenance - MTB, Road, E-BIKE 11-speed compatible - Reinforced chain for E-BIKE use BENEFIT - Smooth and reliable shifting performance - Weight: 257g (116 Links)

- 9-speed compatible - XT/Ultegra - 116 links

Super Narrow SIL-TEC HG-X11 Chain (11-speed) FEATURE - Rear drive Smooth driving without noise - Front drive Preserve chain security at cross chainline - Front & Rear Shift Smooth and reliable shifting BENEFIT - HG-X11 special asymmetric plate design for 11-speed - Weight: 247g (114Link) - SIL-TEC on Plate/Roller - Hollow pin - Weight: 247g (114Link)

The high torque loads of E-MTBs require tough components. The straighter chain line EX1 offers allows the use of a chain that is wider and more robust than those found on drivetrains not specifically engineered for E-MTBs. The EX1 chain has been engineered to run quiet across the gear range and transmit more power to the rear wheel. - EX1 chain is wider and designed for the high-torque, heavy-duty use of E-MTB - Compatibility: 10-speed - Chain length: 144 links

The chain is the heart of the Eagle 1x12 drivetrain, ensuring quiet operation, long life and precise shifting. It features the same link geometry as XX1 Eagle, with solid pins and a more modest finish treatment. - Not for use with front derailleur drivetrains - Links (links): 126 - Drivetrain Speeds: 12 - Chain Connection Type: Single Use Master Link - Half Link Chain: No - Weight: 260 - Compatibility: All levels of Eagle drivetrain systems

SRAM’s 10-speed chain is compatible with all industry-standard 10-speed systems. And, with its great PowerLock connecting link, installation and removal is a snap.

SRAM’s 10-speed chain is compatible with all industry-standard 10-speed systems. And, with its great PowerLock connecting link, installation is a snap.

SRAM's PC-870 Chain makes a trusty partner over hill and dale. It's easy to install, too, thanks to the no-tools-needed PowerLink. Quiet, smooth and reliable, the PC-870 will take you where you want to go.

The PC-951 is SRAM's most economical PowerChain and maintains their high standards of quality. It boasts tough chrome-hardened pins for durability and accurate shifting. And, with its great PowerLink, you don’t even need tools to install it.

SRAM's RED 22 11-Speed Hollow Pin Chain features hollow pins for low weight, strength, and accurate shifting in all conditions. The heavily chamfeRED outer plates improve shifting and an inner plate finish provides longer chain life. And, with its great PowerLock connecting link, installation and removal is a snap.

With SRAM's X1 Chain, it's 1x11 all the time, so the chain can be narrower, stronger, faster — all because it doesn't have to deal with high-stress, front chainring shifting. Since it only has to do rear shifts, gear changes are telepathically fast and feathery light. Its "wide tooth, narrow tooth" pattern perfectly matches SRAM's X-Sync chainrings so dropped chains and cumbersome chainguides are a distant memory. The durability is impressive, too, with SRAM's Hard Chrome tech, solid pins and a proprietary link finish for improved life span.

It might look normal from the outside, but the engineering inside this incredible new chain design is anything but normal and it makes possible a gear range previously found only in 2-chainring drivetrains. And it’s also the biggest contributor to the Eagle drivetrain’s ultra-smooth, precise, durable and quiet performance. The Eagle chain’s links have a smooth radius, with no sharp edges or chamfers, which yield a significant reduction in noise, friction and wear on chainrings and cassette cogs. This design also allows for a flatter plate, which means more consistent chain riveting and greater overall strength. HARD CHROME technology extends the chain’s optimal performance life, and a Titanium Nitride coating on the Gold and Black models decreases corrosion and further reduces friction.

- 1/2" x 1/8" - 100 Links - Single speed - BMX Racing, Freestyle - Half Link Design

KMC's SL Chain sets a new standard with weight reduction, improved shifting performance & enhanced durability. - 1/2" x 1/8" - 112 Links - Black - 1-speed - 1/8" Track Bikes & BMX Racing, Freestyle - Hollow Pins & Plates - Special Dynamic Configured Plates - Super Light: 349 grams - Anti-Drop Design - Heavy Duty Structure - Hollow Inner Plates - Hollow Outer Plates - Hollow Pin - Inner Plate Chamferring - Mud Shedding Design - Special Dynamic K Configuration - Stretch Proof Treatment

- 1/2" x 3/32" - 112 Links - Silver/Black - Single speed - 3/32" Track Bikes & BMX Racing, Freestyle - Special Dynamic Configured Plates - Anti-Drop Design - Heavy Duty Structure - Inner Plate Chamferring - Mushroomed Riveting - Special Dynamic K Configuration

- 1/2" x 1/8" - 112 Links - Silver - 1 speed - BMX Racing, Freestyle & Fixie - Unique "Double L" Bridge & Half Link Design - KMC "Bullet Pin" Connection - Anti-Drop Design - Double L Bridge - Full Nickel Plated - Half Link Design - Mushroomed Riveting - Reddot Design Award Winner

The KMC S1 is a single-speed chain suitable for use with internally geared hubs, or any single speed drivetrain. - High pin power with reinforced durability - Offers a quieter riding experience - Anti-drop design - Inner plate chamfering helps to provide fast and smooth shifting - Internal gear hub system compatible - Links (links): 112 - Color: Silver - Width: 9.3mm - Drivetrain Speeds: Single Speed 1/2 x 1/8-inch - Half Link Chain: No

-X11SL DLC: superlight chain for use with 11-speed Campagnolo/Shimano/Sram with Diamond Like Coating for extra durability, 235g -X11SL: superlight chain for use with 11-speed Campagnolo/Shimano/Sram (Gold color is Ti Nitride coating), 235g

The KMC X-Series has been designed with the specific characteristics of the Shimano, SRAM, and Campagnolo systems in mind and will meet the most demanding requirements. Elaborately designed and manufactured, the X-Bridge technology, thanks to precisely chamfered plates, allows a smooth propulsion and perfect gear changes in all driving situations. - Size: 1/2"x11/128" - Length: 116 Links - Weight: 273 grams

- Stretch-proof, super-narrow chain for use with 10-speed Campagnolo/Shimano/SRAM - Use: Mountain/Road - Size: 11/128-inch - Width: 5.9mm - Weight: 273 grams - 116 links