Tires/Tubes

Before the Pika, gaining traction on gravel roads was a true feat. Now, it’s child’s play. Ramped center knobs roll fast on loose gravel, and U-shaped shoulder knobs dig in on the turns. The Pika is equipped with dual compound tread, EPS protection, and wire bead.

The Newton MTR (Mountain Rear), part of our ultimate tire package developed for gravity riding & racing. A tire that is at its best bringing up the rear while sprinting out the start hut of your race run, as you attack those loose off camber sections, hold the line on rocky chutes and pinballing down rock sections. Who Rides This Tire? Your bike of choice is a Downhill, Enduro or trail rig, you eat/sleep loose turns, berms and full-on terrain. Where Does This Tire Perform Best? Best suited to your rear wheel. A broad range of conditions from loose dust to wet loam. Most at home on Downhill & Enduro terrain, or rowdy trails. Go Faster, Go Bigger The tire, that small contact patch that connects you to the ground, is arguably the most important part of your bike. When you’re in the start hut, about to drop into your race run you need to know that this essential component is designed specifically with the job in mind. What better choice than the tire named after the man who defined the very laws of gravity. For Downhill, Enduro, and trail Dominance Drive focused tread delivers speed and durability with tracking performance that inspires confidence transitioning from straight-line to cornering across a wide range of conditions. Construction A dual-ply, 120TPI construction, the 2x120TPI casing is supple and fast rolling with improved traction while providing high levels of support Grip3 Compound Rear specific, triple density 40/50/60a compound, offering balanced levels of grip and treadwear. Protection EN:Wall – A butyl layer located within the casing ply that provides defence to cut and abrasion as well as providing extra sidewall support.

- Inverted tread design and knurled tread surface are low profile and fast rolling without sacrificing traction - Front and Rear application

- Create an air tight seal for BST rims - Can also be used as a lightweight rim strip for any rim

- Handlebar-mounted tubeless repair kit - Discreet and neat finish, completely integrated inside the handlebar - Anodized aluminum bar ends - Tool-less expansion plugs fit internal bar diameters from 17.5mm to 21mm - Easy to use: No need to dismount the tire - Durable reparation of flats between 1 and 5mm - Integrated holder for an additional chain link and a tubeless valve (link and valve not included) - Includes tubeless plugs (3 x 2mm and 3 x 5mm), needle tool (reamer) and knife - Weight: 75g

Type: Patch Cement Size: Individual tube

• Includes a plastic storage box, 6 patches, cement, and scuffer

- Forged alloy construction - Fits Schrader valves

Serfas replacement inner tubes are lightweight, durable, and affordable.

Patch up punctures in your bike tires with Slime's peel and stick SKABS. No glue means no mess! These SKABS are quick and easy to apply, and come in a compact storage container. Just toss them into your bike bag. - Kit contains (6) pre-glued 1? patches and a scuffer.

- Plastic storage box - Contains 7 large patches cement, and scuffer

We all love to stop and smell the roses, but like they say, every rose has its thorn. And as we all know, there's no better way to ruin a beautiful ride than with a thorn in the tube. No need to worry, though, because we designed our Thorn-Resistant Schrader Valve Tubes to combat pesky pricks of all shapes and sizes. Starting at the basis of the construction, we designed the tube to be thicker at the outer side (the part against the tire) in order to stop pesky bits from puncturing all the way through the tube. Then, at the inner side (the part against the rim), it's actually thinner in order to reduce weight. This way, you don't have to sacrifice performance in the name of protection. - Thicker construction on the outer side (against the tire) enhances puncture protection. - Thinner construction on the inner side (against the rim) maximizes weight savings.

- 0.9mm wall thickness - 700c x 18 – 25 = 27 x 1 - 700c x 28 – 35 = 27 x 1-1/8, 1-1/4

Odyssey's Air Supply tubes are specifically sized to fit modern BMX tires, and they are manufactured with a stronger emphasis on quality versus simply chasing the lowest possible price. On average, the Air Supply BMX tube retains air significantly longer than others currently available on the market. This is down to both the rubber that is used, and because of strict quality control during manufacturing. It is normal to assume that a “tube is a tube,” but a higher-quality tube will always last longer than a cheap tube during comparable everyday use.

Protect your tube from spoke hooks with CT Cotton Rim Tape. - Adhesive Backing - 10 Rolls Per Box

- Butyl rubber - Removable valve core - Schrader valve - Wall thickness: 0.9mm

- Butyl rubber - Economy tube - Removable valve core - Wall thickness: 0.9mm

- Shim adds support to Presta stem used in a Schrader rim

- Butyl rubber - Economy tube - Schrader valve - Removable valve core - Wall thickness: 0.9mm

When gluing high performance tubular tires to your high performance wheels, be sure to rely on Challenge's Universal Rim Cement. This glue is formulated to provide maximum adhesion and hold on both alumimum and carbon rims, even in high temperature conditions. Dive into high speed corners with confidence.

Compatible with all tubeless road, MTB and gravel tires. Refill packs with 10 repair plugs (5x thin and 5x thick).

Specifically designed for the vulcanization of tube patches, valve patches, and rubber-based tube valve repair units.

- Anodized alloy construction - Fits standard Schrader valves

- Butyl rubber - Removable valve core - Schrader valve - Wall thickness: 0.9mm

- Butyl rubber - Economy tube - Schrader valve - Wall thickness: 0.9mm

Our Standard Schrader Valve Tubes feature a molded method of construction that ensures a consistent thickness of butyl rubber. This means that they don't have any unnecessary weight and will roll smooth, ride after ride.

- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm

- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm

We all love to stop and smell the roses, but like they say, every rose has its thorn. And as we all know, there's no better way to ruin a beautiful ride than with a thorn in the tube. No need to worry, though, because we designed our Thorn-Resistant Presta Valve Tubes to combat pesky pricks of all shapes and sizes. Starting at the basis of the construction, we designed the tube to be thicker at the outer side (the part against the tire) in order to stop pesky bits from puncturing all the way through the tube. Then, at the inner side (the part against the rim), it's actually thinner in order to reduce weight. This way, you don't have to sacrifice performance in the name of protection. - Thicker construction on the outer side (against the tire) enhances puncture protection. - Thinner construction on the inner side (against the rim) maximizes weight savings.

- Valve Type: Schrader - Valve Core: Removable - Butyl rubber - Wall Thickness: 0.9mm

- Standard 1mm tube thickness - Presta valve

Kenda Presta valve tubes are dependable replacements. Use them to build up your bike, and throw a spare in your bag so you can keep on riding.

- Standard 1mm tube thickness - Schrader valve

- Repairs punctures up to 1/4 (6mm) - Optimized for temps down to 15degF (-9.4degC) - Synthetic later minimizes the risk of allergic reactions

Schwalbe tubes retain air pressure considerably longer than standard tubes. The quality and purity of the rubber mixture directly affects the quality of the tube. - Decreased air loss design - Butyl rubber - 40mm valve length

Your tubeless wheels will benefit from the use of Orange Seal Tubeless Tire Sealant. It is proven to seal large punctures up to 1/4-inch and perform under varying temperatures and altitudes. Orange Seal Tubeless Tire Sealant is compatible with most bike tire systems and is eco-friendly.

- Butyl rubber - Economy tube - Schrader valve - Removable valve core - Wall thickness: 0.9mm

- 0.8mm walls (0.9mm walls for 16", 20", 24" sizes) - Puncture resistant

- 0.8mm walls (0.9mm walls for 16", 20", 24" sizes) - Puncture resistant

- Valve Type: Schrader - Valve Length: 32mm - Valve Core: Removable - Butyl rubber - Wall Thickness: 0.9mm

- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm

- Butyl rubber - Economy tube - Wall thickness: 0.9mm - Removable valve core

Schwalbe tubes retain air pressure considerably longer than standard tubes. The quality and purity of the rubber mixture directly affects the quality of the tube. Special quality control that prevents unpleasant surprises. - 40mm valve length

Schwalbe tubes retain air pressure considerably longer than standard tubes. The quality and purity of the rubber mixture directly affects the quality of the tube. - Valve Length: 40mm

- Easily plug a hole in a tubeless or tubeless converted tire - No need to remove the tire from the rim, simply plug, replace lost air and go - Includes: Insertion tool and (5) rope plugs

Schwalbe tubes retain air pressure considerably longer than standard tubes. The quality and purity of the rubber mixture directly affects the quality of the tube.

- Removable valve core - 0.9mm wall thickness

Schwalbe tubes retain air pressure considerably longer than standard tubes. The quality and purity of the rubber mixture directly affects the quality of the tube.

Schwalbe tubes retain air pressure considerably longer than standard tubes. The quality and purity of the rubber mixture directly affects the quality of the tube.

The industry standard comes in all sizes. Premium-quality Bontrager Standard butyl rubber tubes feature a 0.9mm wall thickness for the perfect balance of weight savings and durability. - 0.9mm wall thickness - Equipped with removable valve cores - 100% inspected for guaranteed quality - Best value 27-inch tire size equivalents - 700cx 23 – 25 also fits 27 x 7/8 – 1 - 700c x 28 – 32 also fits 27 x 1-1/8 – 1-1/4 - 700c x 35 – 44 also fits 27 x 1-3/8 – 1-3/4

The industry standard comes in all sizes Premium-quality Bontrager Standard butyl rubber tubes feature a 0.9mm wall thickness for the perfect balance of weight savings and durability. - 0.9mm wall thickness - Equipped with removable valve cores - 100% inspected for guaranteed quality - Best value 27-inch tire size equivalents - 700c x 28 – 32 also fits 27 x 1-1/8 – 1-1/4 - 700c x 35 – 44 also fits 27 x 1-3/8 – 1-3/4

- Valve Type: Presta - Valve Core: Non-Removable - Wall Thickness: 0.9mm - Flat Fold Width: 44mm (1.75-2.10), 65mm (2.50-3.0), 78mm (3.0-3.50)

- ISO Diameter: 507 / 24" BMX - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Standard Schrader - Shaft Type: Smooth - Valve Core: Removable

- ISO Diameter: 559 / 26" mtn - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 102g (1-1.25), 165g (1.5-1.75), 174g (1.9-2.125), 198g (2.1-2.3), 281g (2.4-2.75)

- Valve type: Presta - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm

- Valve: Presta - Butyl rubber - Wall thickness: 0.9mm

- Valve type: Schrader - Valve core: Removable - Valve stem: Smooth - Butyl rubber - Wall thickness: 0.9mm

- Valve Type: Presta - Valve Core: Non-Removable - Wall Thickness: 0.9mm

Schwalbe tubes retain air pressure considerably longer than standard tubes. The quality and purity of the rubber mixture directly affects the quality of the tube. - Valve Length: 40mm - Valve Type: Schrader - Width: 1.5-2.25

Schwalbe tubes retain air pressure considerably longer than standard tubes. The quality and purity of the rubber mixture directly affects the quality of the tube. Special quality control that prevents unpleasant surprises. - 40mm valve length