Parts & Accessories

Type: Patch Cement Size: Individual tube

• Includes a plastic storage box, 6 patches, cement, and scuffer

- Forged alloy construction - Fits Schrader valves

Patch up punctures in your bike tires with Slime's peel and stick SKABS. No glue means no mess! These SKABS are quick and easy to apply, and come in a compact storage container. Just toss them into your bike bag. - Kit contains (6) pre-glued 1? patches and a scuffer.

- Plastic storage box - Contains 7 large patches cement, and scuffer

When gluing high performance tubular tires to your high performance wheels, be sure to rely on Challenge's Universal Rim Cement. This glue is formulated to provide maximum adhesion and hold on both alumimum and carbon rims, even in high temperature conditions. Dive into high speed corners with confidence.

Compatible with all tubeless road, MTB and gravel tires. Refill packs with 10 repair plugs (5x thin and 5x thick).

Specifically designed for the vulcanization of tube patches, valve patches, and rubber-based tube valve repair units.

- Anodized alloy construction - Fits standard Schrader valves

Your tubeless wheels will benefit from the use of Orange Seal Tubeless Tire Sealant. It is proven to seal large punctures up to 1/4-inch and perform under varying temperatures and altitudes. Orange Seal Tubeless Tire Sealant is compatible with most bike tire systems and is eco-friendly.

- Easily plug a hole in a tubeless or tubeless converted tire - No need to remove the tire from the rim, simply plug, replace lost air and go - Includes: Insertion tool and (5) rope plugs

- Shim adds support to Presta stem used in a Schrader rim

Special assembly liquid for bicycle tires. A practical sponge applicator allows the liquid to be applied to the tire bead very simply - without smudging fingers. When inflating, the tire bead slides easily into the correct position on the rim. The liquid evaporates completely after about 10 minutes!

- The original green sealant, completely non-toxic and environmentally safe - Seals punctures up to 1/8-inch

- Permanently seals tube punctures up to 1/8 inch - Non toxic formula installs easily through Schrader valves - Complete with valve core remover and filler tube - Slime keg fills 160 tires at 1/2 the price per ounce of the 16 oz size

- Repairs punctures up to 1/4 (6mm) - Optimized for temps down to 15degF (-9.4degC) - Synthetic later minimizes the risk of allergic reactions

Endurance formula lasts twice as long as standard Orange Seal. - Premium Latex coats the whole casing, from tire bead to tread cap - Seals punctures up to 1/8-inch, and slices up to 1/2-inch with the use of Nanites - Developed to add as little weight to a tire as possible - Made of eco-friendly biodegradable ingredients

Continental's Easy Tape Rim Strips are 20mm wide and are made of a tough, elastic and waterproof, non-adhesive nylon. This makes they quick and easy to install. Just stretch them over your rims and let them snap in place! Each box contain a pair of rim strips.

Grenade style Schrader Valve caps

Looking for a super lightweight but badass tubeless sealant? Boom, you've just found it my friend! No Puncture Hassle performs under the most brutal race conditions. The cutting-edge microfiber molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. The formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride. Developed with the world's top downhillers and pro peloton teams, to give you the finest tire sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels/tires, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top ups on the go! - For Downhill, Enduro and Road tires - Seals tears and holes up to 6mm - Contains UV puncture detection - Won't dry out or ball - Works from 15psi-120psi and temperatures from -20°C to +50°C - Biodegradable

- EVA flat liner material - Resists thorns, glass, and sharp objects - Place inside tire between tube and tire

Don't let a flat tire ruin your ride. Serfas' unique micro-particle blend instantly seals quarter inch punctures & keeps you rolling forward. Pair this sealant with Serfas' full line of sealant accessories; including, rim tape, valves with removable cores, & valve adaptors for best results. - Flat Protection - Seals 1/4 Inch Punctures - Can Be Used In Tubeless, Tubular & Tubed Application - Bottle Is Good For 6-16 Mountain Bike Wheels Depending On Size - Most Economical Size - Contains Micro-Sealing Particles - Sealant Does Not Freeze - CO2 Compatible - Compatible With Serfas Tire Medic Sealant Kits

Stan’s NoTubes Sealant is a thin, low-viscosity liquid that coats the tire interior and seals punctures quickly. Two ounces of Stan's in a tubeless tire can repair punctures up to 1/4" to keep you rolling. Stan's Tire Sealant is formulated to stay liquid in tires for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart can convert up to 16 tires. - Suitable for use in tubeless tires and standard tubes - Designed to seal punctures up to 1/4" - Stable down to -30 degrees Fahrenheit - Non-hazardous, non-corrosive, non-toxic - Contains natural latex

The Problem Solvers Presta Valve Extenders add 33 to 50mm of length to your tube or tire valve so that it protrudes far enough out of deep-section rims so that you can attach your pump. These lightweight, durable aluminum extenders simply screw onto your Presta valves by hand.

45NRTH utilizes a two-piece construction method to create a reliable and high-performing bicycle tire stud with a concave carbide-aluminum design. The open space and edges created by the large concave crown result in twice the surface area for increased traction and grip. - Concave tip for traction, durability, and longevity - Aluminum base to save weight - Compatible with 45NRTH stud insertion tool - Compatible with all studdable 45NRTH tires - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.

As part of the comprehensive range of tubeless tire sealants, the P ZERO SmartSeal formula is designed for high pressures of road-specific tires. - Protects against ?ats and air leaks from thin sidewall bicycle tires - Designed for high pressure tubeless & TLR tires, tubulars and inner tubes - CO2 compatible - Contains Ammonia, Latex, and micro sealing particles - Won’t leave sticky residue in the tire - Compatible with a wide range of temperatures (-20°C/68°F to 70°C/158°F)

Continental's Easy Tape High Pressure Rim Strips come in sizes to fit 700c and 650c road rims and are made of a tough, elastic and waterproof, non-adhesive nylon. This makes them quick and easy to install. Just stretch them over your rims and let them snap in place! They are also made specifically for when you're running extreme pressures and can handle up to 220 psi. Each box contains a pair of rim strips.

Bigger than standard Presta valve nuts, the Big P-Nut is designed to provide extra leverage to better tighten tubeless valves on standard tubeless rims. - Over-sized design provides extra torque when tightening - CNC-machined from AL-6061 aluminum

The Problem Solvers Presta Valve Extenders add 30 to 70mm of length to your tube or tire valve so that it protrudes far enough out of deep-section rims so that you can attach your pump. These lightweight, durable aluminum extenders are for use with Presta valves that have removable cores. The proper tool for removing the cores and installing the extenders is included.

As part of the comprehensive range of tubeless tire sealants, the Cinturato SmartSeal formula is ideal for Gravel and Urban use. - Standard formula is ammonia and latex free, less aggressive to bicycle equipment and your skin - Protects against flats and air leaks from thin sidewall bicycle tires - Latex and protein free for reduced risk of allergic reaction - Compatible with CO2 only for an emergency repair in the field (CO2 speeds up coagulation so sealant must be replaced afterwards) - Won’t leave sticky residue in the tire - Compatible with a wide range of temperatures (-20°C/68°F to 70°C/158°F)