BMX

Odyssey's custom-designed Par Ends come standard with all of their grips. Its special plastic composite will not shatter like cheap bar ends do, and they’re very lightweight. The Par End is a combination of the over-the-bar-style cap and the inside-the-bar-style to prevent the inner portion from blowing out like it does on ordinary press-fit bar ends. Comes stock on all of Odyssey's grips.

Made with high quality motocross vinyl, these palettes fit the UCI-approved cycling races. Available in all the colors that are authorized by the various sanctioning bodies. FEATURES - Hook & Loop Straps - Velcro Frame Mount - 3D Compression Vinyl - UCI / USABMX Approved SPECIFICATIONS - Material Vinyl - Dimensions Fits All Frames - Process 3D Stamping - Weight 2.4 oz

- Sold in pairs. - Allen wrench included.

The Graduate sleeve is the replacement sleeve for the Graduate peg that's made from long lasting, fast sliding plastic. - Sold singly

The M2 lever works with a single cable or Odyssey's dual cable system. - Improved braking power for Gyro users - Left/Right hand compatible

Seeley BMX Peg

The Slim by Four is a BMX-specific brake pad with a symmetrical shape designed for both forwards and backwards braking. A custom inner frame helps to stiffen the pad and prevents excessive braking power from being lost to flex. SPECS - Clear and Gum colored “Soft” compound pads provide extra grip on powder coated rims. - Black “Normal” compound Slim-By-Four pads are the most popular pad choice for most riders.

The Gost pads feature a unique design to make install and set up easier. - Improved stiffness by built in toe-in into the pad shape and using a solid extruded aluminum frame - Assembly is simplified by lining up the rim and tightening a M6 female bolt

Initially designed for the European market’s UCI races, these are also a requirement for USABMX Nationals. The Box Two Side Number Plates are shaped from embossed foam and feature full-color printed graphics. They comply with UCI regulations and fit all bicycle frames. Hook-and-loop straps combined with a piece of adhesive-backed hook-and-loop tape hold the plates firmly in place. They have a black with a white background (colored backgrounds are available separately).

The MK 4 version continues the GLAND’s heritage, but in a smaller and sleeker overall size which should appease many riders. The images beside show the top, profile, and under side of each guard.

Broc Raiford signature grips feature a comfortable ribbed design and smooth ends for improved wear resistance. - 160mm lenght - Par Ends Included

- Lower cables for Odyssey's Gyro G3 (sold separately). - Universal fit. - Lower cables only.

- Upper cables for Odyssey's Gyro G3 (sold separately) - Universal fit. - Upper cables only.

The Odyssey K-Shield Linear cable features a pre-stretched inner Slic Kable covered in a linear casing to prevent binding and an outer K-Shield mesh housing for less weight over a standard steel mesh housing (2.9 oz). - Black - 60 – 65mm

Cornerstone Grip features a ribbed design with Cornerstone logo. - Includes Odyssey Par Ends

The Jake Seeley signature grips feature a gradually increasing rib width design and a tapered core for comfort. - 160mm

New Sunday Wax in puck shape.

One of the most important goals that Odyssey had when they sat down to work on new braking designs was to make the whole system easier to install (and remove) without sacrificing performance. They also wanted to be sure that every component would be very affordable. The Springfield lever is easy to install and remove without having to wrestle grips on and off. An ordinary hinged clamp can be bulky and expensive so a new clamping design made specifically for die-casting was used. This approach keeps the lever reliable and affordable. The lever handle is the same comfortable shape as the proven Monolever Medium blade.

As the name implies, this new version can be easily adjusted to cover 3 different lengths by utilizing the cable’s unique straddle interface connection. This tool-free feature allows the Adjustable Quik Slic Kable to be a one-size-fits-all cable for virtually every braking configuration. FEATURES - Adjustable hanger slot allows upper cable to rotate for optimum alignment. - The integrated hanger and straddle cable creates direct routing to brake arms with no bends or twists to reduce flex. - Linear K-Shield mesh housing offers higher compression rate and lighter weight than standard steel mesh. - All Odyssey Linear cables are offered with the K-Shield housing. - Specially designed and machined Volcano ferrules prevent premature housing blowout. Velcro strap included. SPECS - Housing length: 995mm - Frame requirements: Slotted cable stop and guides. 245mm (+/-3) distance from center brake boss to the front of the cable stop is recommended. - Brake requirements: Open-ended U-brake arms. - Works with most brake levers. - Velcro strap included.

- New ultra-slim 2014-T6 aluminum seat clamp with replaceable hardware and self-aligning nut. - 6061-T6 aluminum construction. - Standard 1-1/8-inch size.

The new Gsport Uniguard is a simple, inexpensive functional guard that eliminates the need to spread the dropouts. It’s made from Heat-Treated Cr-Mo Steel and is LHD and RHD compatible as well as Drive and Non-Drive compatible. All bases covered. Available in 14mm or 3/8?.

Odyssey Bluebird chain is the proven and reliable KMC 510-HX chain with an added a permanently attached, factory installed half-link to one end. When the chain is trimmed to size you can easily decide whether or not to use the half-link. Original factory assembled pin joints are radically stronger than workshop assembled ones, so this is a huge benefit. - Proven and reliable KMC 510-HX chain - Factory installed half-link for a radically stronger set-up

Odyssey took their proven Linear Slic Kable housing and replaced the steel linear wire with aluminum. Utilizing the aluminum wire in the housing saves you significant weight, roughly 30%. This cable also features their specially designed “volcano” ferrules that they’ve used since 2008 to prevent housing blowouts. This Kable also comes with color-coaded inner wires and ball ends to differentiate between their regular Linear’s Race Linear Slic Kable. - Length: 60 – 65mm - Black

- Threads onto 3/8" axles - Double-sided - Oversized - Alloy - Length: 3" / 74mm - Width: .94" / 24mm - Sold as a pair

Designed by the infamous Rich Lee, the Box Two plates are injected in an impact-resistant and colorfast resin. The airflow ports are artfully sculpted to both reduce weight and drag. Each plate includes hook-and-loop closures secured in place with custom Box rivets. Did you know that these stylish creations are also the official number plate of the UCI/GSX Super Cross Series?

Designed by the infamous Rich Lee, the Box Two plates are injected in an impact-resistant and colorfast resin. The airflow ports are artfully sculpted to both reduce weight and drag. Each plate includes hook-and-loop closures secured in place with custom Box rivets. Did you know that these stylish creations are also the official number plate of the UCI/GSX Super Cross Series? FEATURES - Hook & Loop Velcro Straps - Steel Rivets - Replaceable Number Pallet SPECIFICATIONS - Size: Small // Large - Dimensions: 6.5 x 9 inches (Small) // 8.25 x 9.5 inches (Large) - Weight: 84 g / 2.96 oz (Small) // 95 g / 3.35 oz

The Odyssey Medium Monolever is a favorite with its familiar feel, smooth edges and variety of handle options. - Fits 7/8" bars, has a hinged bracket, and does not include cable knarps

This custom 7075-T6 aluminum pre-load bolt design is included with every Odyssey fork. - Fits both a 6mm and 8mm allen key. - Front brake cable thru-way hole for removal without disconnecting brake hardware. - Designed with an easy-cut thread groove if you cut your fork’s steerer tube down.

Designed and tested by Aaron Gwin to exceed the demands of world-class racing. - Curved profile provides better aero performance - Low profile design allows for a full field of vision - Durable and flexible reinforced polymer construction - Easy installation and removal using zip ties

- Press fit designed to work the hub's non-drive side collar.